Properly Examine your Heating Unit for the Winter

It's becoming that time of year where we switch from using our heat to our AC. We've been focusing on how to make sure your AC system is working well when you first turn it on. However, we also want to focus on how to treat your heating system at the end of the cold season, so it's ready to use in the fall.  These tips were provided by an expert in heat and AC repair in Bowie MD.

1. Evaluate your furnace's efficiency. As furnaces age, they tend to use more energy, which means your bills will go up. Pull your energy bills from the past several years, or simply call your energy provider to request the information. If you see a rise in costs, your furnace might be to blame. If your furnace is over 15 years old, it might be time to consider a new system.
2. Check the mechanics. With use, the pilot light, burner assembly, heater exchange, combustion chamber, and more can start to develop wear and tear. In some cases, this isn't just a cause for malfunction, but it can be downright dangerous if carbon monoxide isn't venting properly.

Before you turn off your furnace for the season, take these steps to ensure it will be ready to serve you once the weather turns cold again. If you need help, or professional advice regarding your heating system, contact a local, reputable HVAC contractor.
 

Get your AC System Off to A Good Start

Spring is finally here, and that means it won't be long before we will be complaining that it's too hot out. But for now, we can just enjoy the mild spring weather. As we start to use our AC more, we want to help you make sure your system is working well.

Even if you're good about changing your filter throughout the winter on a regular basis, it's a good idea to put a fresh one in at the end of the season. For many people, the air conditioning is part of the same system, and those filters are imperative to keeping your ducts clean and your air quality at its best. Dirty filters can put more stress on your AC system to produce cold air and in return can drive up your bills.

If you have any questions or want more recommendations for how to keep your AC system running well, contact an expert in air conditioning in Fountain Hills AZ.

Prepare Your AC for Summer

Just as it's important to stretch before exercising, it's important to make sure your AC unit is ready for the hard work it will put in these upcoming months. Here are a few steps you can do to keep your central air system running great.

1. Lift up the grill and fan and use a garden hose to wash those fins more thoroughly from the inside out. Don't use a pressure washer because it will cause damage.
2. Reassemble the unit and move to the indoor unit, called the evaporator.
3. Find the drain from the evaporator, and make sure that hose is not plugged with dirt, algae, or mold. You can use a wet/dry vac to clear the pipe.
4. Replace the air filter on the indoor unit.
5. Turn the power back on and test for a temperature change when the unit is running.

These are very basic cleaning instructions that apply to almost all central air systems. It is also a good idea to schedule a maintenance service appointment so the mechanics of your system can get a good check-up before the cooling season starts. Many times small issues can be fixed before they become big (and expensive) problems. For more information contact a local company for air conditioning repair in Burke VA.
 

Steps to Get Your Air Conditioner Ready for Hot Weather

Hot and humid weather is on the way, and it's time to think about our air conditioners. Just like any other appliance, it is important to do regular maintenance to ensure that it will continue to serve your household for as long as possible, and will run with maximum efficiency. It's not a difficult job, and your small investment will pay off in the long run. Follow these steps each spring to keep your central air system running great. These tips were provided by an air conditioning service in Greenbrae CA.

1. Turn off the power to the unit, either via the plug outside or by flipping the circuit breaker inside the house.
2. Clean leaves, grass clippings, or other debris from around the outside unit, also called the compressor or condenser.
3. Remove the outer case of the compressor and use a vacuum with a soft brush attachment to vacuum the fins. This job can be done several times a year, especially after a heavy pollen season.

 

More Wear And Tear on Your AC Unit - Dirty Filter

By forcing your air conditioner to work harder, a dirty filter not only boosts cooling costs but also increases the amount of wear and tear your AC is subject to. A dirty filter will also increase the amount of friction-causing substances that find their way into the heart of your system. That’s because, by impeding the free flow of air, a dirty filter will increase the force of suction, thus drawing contaminants in around the edges of the filter. A surprising number of air conditioning repairs could have been avoided simply by keeping a fresh air filter installed.

We recommend changing your filter every month and at most every 3 months. It is a simple task that can have great long term benefits. If you have any questions, reach out to a St Albert AB air conditioning service.

Drawbacks Of A Dirty Air Conditioning Filter

An air conditioner relies upon the coordinate functioning of numerous components in order to supply your home with cold air. One of the most basic of these components is the air filter. Yet the role played by the filter is much more important than many people assume. If you would like to learn more about why it is vital that you keep a clean filter installed in your AC, read on. If you have any questions, reach out to a Yankton SD air conditioning maintenance expert.

Lower Efficiency 

Over time, as it removes dust, pet hair, and other unwanted debris from the air, your air conditioner’s filter will become more and more clogged up. An excessively dirty filter will eventually begin to impede the proper functioning of your AC, by making it more difficult for the system to suck in the air it needs. As a result, the system much run longer and work harder--thus driving up the expense of cooling your home.

What You Can Expect From an Air Conditioning Inspection Service Appointment Pt 2.

We just explained some things you can expect during an inspection service appointment. We wanted to keep that trend going with some more helpful info. Here are some more things you can expect:

• Condenser coil
• Fan motor and blade
• Wiring
• Refrigerant lines
• Blower

In addition, the technician will replace the filter, and run the system to check for a temperature drop. You should get a full written report of what checks were performed, and recommendations if your system needs any additional service. These recommendations are made to keep your system working at its maximum capacity with peak efficiency.

If you are considering calling for a New Providence NJ air conditioning inspection before the warm weather arrives, it is well worth the cost. You will have the peace of mind that your air conditioning is ready to keep you comfortable on the hot and humid days of summer.

What You Can Expect From an Air Conditioning Inspection Service Appointment Pt. 1

Some homeowners question the need for calling in HVAC contractors for an inspection, but the service is well worth the money. In fact, getting these things checked will often save you money in the long run, because it can help you avoid costly repairs, and it will help your central air to run more efficiently and have a longer life span.

What can you expect from an inspection service? A technician will come out and look at all aspects of your system, including:

• Evaporator coil
• Evaporator drain
• Circuit breaker and fuses
• Capacitors
• Thermostat
• Condenser cabinet

Have questions? Reach out an expert in air conditioning repair in Fort Worth TX.